What are the tips for using wood glue?

Wood plywood glue is often used in our daily learning and living environment, but when using wood plywood glue, methods and techniques are also possible. Below I will introduce and analyze the management skills of woodworking glue for you.

What are the tips for using wood glue?

1. The moisture content of the wood used in the woodworking adhesive is controlled at 8%~15%, and the bonding effect is better.

2. Prepare pressurizer, cleaning and moisture-proof tools first, then glue.

3. The ratio of wood glue and curing agent should be fully mixed, and it is best to be as accurate as possible when comparing.

4. The low transmittance of woodworking adhesive and curing agent is 10:0.5~10:1. Stir all day, but better. Please use about 4 hours. If the bubbles form normally, you can continue to use the microbubbles. If there are too many bubbles, fry them. Soak wood in clean foam before use.

5. When using adhesive, these surfaces should be applied evenly. The processing speed of the sheet and the pressure system should be increased when gluing. Otherwise, if the dwell time is too long, the adhesive surface will harden.

6. If the board is large, try to make it as thick as possible to prevent surface hardening. The amount of glue should be around 300g\u002Fm2. There is glue flow on the back panel, no abnormal glue flow, easy to open. glue.

7. After removing the adhesive or curing agent from the packaging barrel, pay attention to properly lift the mixing bag or lid to avoid long-term contact with air to avoid malfunction.

8. Apply pressure to balance the developing pressure. Down pressure: 6-10 kg/cm² for softwood and 10-15 kg/cm² for hardwood.

9. The longer the pressure release time, the higher the pressure release effect. The longer the time, the smaller the board can be unloaded within 2 hours, and the larger board within 5 hours.

10. For tools that require water after cleaning, it is not feasible to use the water content of the cleaning tools, such as preparing multiple sets of tools.

WinLong is a wood glue manufacturer, if you would like to learn more, please contact the adhesive experts at internetwoodglue.com. We have served customers in dozens of industries and can meet all your adhesive needs