In home decoration, wood glue is often used. Many people think that woodworking glue is relatively simple to use, but in fact there are many things to pay attention to. Let me introduce to you the cleaning method of wood glue and the precautions for using wood glue!
How to remove the wood glue that fell on the ground
1. Alcohol removal method
Take a towel or the like and dip an appropriate amount of 95% alcohol solution, and then gently wipe it on the place where the wood glue is stuck, and the wood glue will easily soften and fall off.
2. Gasoline removal method
Dip some gasoline with something like a towel, and then gently wipe it on the place where the wood glue is stuck. At this time, it should be noted that because gasoline has a “dissolving” effect on the paint, you need to be careful when using it, so as not to cause the into unnecessary trouble. Before using it, you can dab it in an unimportant place to observe the changes, and use it if there is no problem.
3. Removal of hand cream
Everyone does not know that hand cream can also have the effect of removing wood glue. The hand cream is rich in a large amount of solvent (usually more than 75%), and the water is rich in a small amount of surfactant, and this patient can active The agent has very good wetting and dissolving ability, and can quickly penetrate into the surface of woodworking objects, thus achieving the purpose of removal. Of course, some similar products, such as creams, facial cleansers, washing spirits, etc., also have the same effect.
What are the precautions for the use of woodworking glue?
1. Mixing
When mixing the main agent and curing agent together, the weight ratio of 100 to 15 must be strictly followed, and the mixture should be fully stirred. The mixed jigsaw glue must be used up within an operable time. When mixing glue, do not mix dust and other impurities or add water. It is forbidden to mix the main agent and curing agent with each other before use. After taking the glue, you should pay attention to the seal and keep it.
2. In terms of wood processing accuracy
When processing wood, the accuracy must be less than 0.15mm. The wood bonding surface should have no processing defects such as “biting and finishing” and maintain a good 90-degree angle. The wood bonding surface should have no “planing marks, carbonization” and other phenomena. It is forbidden to use the bonding surface that has been polluted by grease, dust, etc. of wood for bonding.
The above is all about how to remove wood glue and what are the precautions for using wood glue. I hope it will be helpful to everyone.
winlong wood glue manufacturer offers a large amount of wood glue, if you are looking for wood glue supplier, welcome to contact us
