How To Clean Urea Formaldehyde Resin Powder

Urea formaldehyde resin glue powder has been widely used in various industries. In order to make better use of resin glue powder, we need to do a good job of safety protection. This requires us to carefully understand its properties and properties before using urea formaldehyde resin glue powder. Operation process of cleaning.

We need to pay attention to many problems when cleaning urea formaldehyde resin glue powder. Let’s learn about the cleaning of urea formaldehyde resin glue powder.

Cleaning of urea formaldehyde resin glue powder:

Make sure to mix thoroughly before using urea formaldehyde resin glue powder, which will use the container, and the glue mixing and glue powder tools should be cleaned after using the resin glue powder. Use warm water to clean, because once the glue has solidified, it will be difficult to clean. Do not drain the water used to clean the urea-formaldehyde resin rubber powder into the sewer pipe, which may cause pollution. Pay special attention to this aspect.

Safety precautions:

Operators must pay attention to urea formaldehyde resin glue powder when using it. Avoid direct contact with the skin, which will affect people with skin allergies. Wear impermeable gloves. Similarly, pay attention to eye protection to prevent splashing into the eyes.

Wash your hands before meals and after work, and dry your skin with paper towels after washing. When emptying the transport bag, avoid breathing dust. In addition, good ventilation is very important, especially in areas where glue is mixed, glued, loaded and pressurized.

The cleaning and safety protection work of uf resin powder is actually very simple, but it is essential work. Then we need everyone to pay special attention when using it. When we are in contact with the product itself, we must pass The correct way to deal with, do not blindly operate, so I hope that the above introduction, everyone can pay attention.