Glue for bamboo and wood fiberboard

1. Overview: The domestic bamboo and wood fiber (MDF) siding is gradually rising, and the amount will be larger and larger in the future. The advantage of bamboo fiberboard (MDF) is that it is environmentally friendly and has no peculiar smell, but many users have reported that there is still a smell in a multi-purpose room after the decoration, which is the smell emitted by the glue. However, there is currently no adhesive product on the market that is really aimed at the special glue for bamboo and wood fiber siding, and only traditional structural adhesives can be used to stick the siding. Bamboo and wood fiber siding has been on the market for less than five years, and it has only been recognized by the market for nearly two or three years. Many users are not very clear about the characteristics of the material. In the construction, they think that it can stick with glue. This is a Misunderstanding, this is only a temporary phenomenon. Bamboo and wood fiber siding will have thermal expansion and cold contraction. If the glue itself has too much shrinkage resistance, the seams of the board or the gap between the board and the wall will become larger and larger after the weather changes in winter and summer. , it will seriously cause the deformation of the wall panel to fall off, so the performance requirements of the adhesive are very high. Too high a shrinkage ratio of the film will cause a large gap in the wall panel, and too low a shrinkage ratio of the film will cause a decrease in the bonding strength or even degumming. According to the characteristics of bamboo and wood fiber siding, WINLONG technology has developed a special adhesive for high-strength bamboo and wood fiber board. The production of this technology has filled the domestic blank and passed the EU standard SGS test.

2. Traditional structural adhesives have many disadvantages, such as slow drying, strong odor, not environmentally friendly, poor bonding strength, excessive shrinkage resistance, and difficult to clean (especially the hands and clothes of the construction master and the use of used glue guns and nozzles are difficult to clean), and some traditional structural adhesives are even toxic.

3. Special adhesive for high-strength bamboo and wood fiberboard (MDF) Main features: Compared with traditional oil-based structural adhesive, the drying speed is increased by 50%, the positioning of the board and the wall is fast, the bonding strength is high, no triphenyl, no peculiar smell, no formaldehyde release, environmental protection Non-toxic, non-corrosive, with good shrinkage resistance. If the glue accidentally sticks to clothes or skin during construction, it does not need any solvent. It can be washed with clean water without harming the skin and clothes. After the glue gun and nozzle are used, they can be used repeatedly after soaking in water. There is no need to clean the glue gun and glue nozzle, which increases the number of uses and saves labor costs and glue gun costs.