How does hot melt glue stick firmly? 1. In order to bond firmly, the first problem to be solved is to ensure the correctness of hot melt adhesive selection. There are many types of hot melt adhesives, including rubber granules, rubber blocks, rubber powder, plastic films, omentum films, etc. There are also types of adhesive

What glue is used for book binding? Nowadays, eva-type hot-melt adhesives are generally used to stick the sides of books, and pur-type hot-melt adhesives are also used, but the cost of using pur hot-melt adhesives will be slightly higher. The process of gluing the spine of the book is as follows: After folding the pages,

Is hot melt glue thin or thick? After the hot melt adhesive is melted, some are thinner and some are thicker. Which one is better? ——In fact, it depends on the application needs! Compared with the hot melt adhesive with a low consistency, the hot melt adhesive with high thin consistency will be harder after

What is hot melt adhesive aging? Aging of hot melt adhesive is relatively common in its application. This phenomenon is mainly caused by heating the glue for a long time or the heating temperature is too high. How do you know that the hot melt adhesive has aged? The aging hot melt adhesive may appear

How strong is the hot melt adhesive How strong a hot melt adhesive is depends on how well it fuses with the substrate. Adhesive penetration is moderate, which is of great help in the formation of good adhesion. In the past, it has been proved from countless practices that no matter how sticky the colloid

Superior performance of hot melt adhesive for paper packaging With the continuous development of the market economy, consumers' requirements for commodities no longer stay in the commodity itself, and more and more attention is paid to the packaging of commodities. On the other hand, consumers use the box to intensify their emotions. A good product

Can hot melt glue stop water leaks? The relationship between hot melt adhesive and water is not friendly. In many applications of hot melt adhesive, water will cause it to lose its original bonding ability, but this is not absolute. To prevent water leakage, it is necessary to make the hot melt adhesive under certain

Precautions for the purchase and use of carton hot melt adhesive Carton hot melt adhesive is a kind of plastic adhesive. Its physical state changes with the change of temperature within a certain temperature range, but its chemical properties remain unchanged. It is non-toxic and tasteless, and is an environmentally friendly chemical product. Because the