A complete introduction to the assembly glue

Glue for all kinds of assembly in wood crafts, best wood glue for edge gluing. Even the gluing not seen at 45° angle can achieve high gluing strength. The modified rubber has good wet viscosity, flexibility, heat resistance, water resistance, freeze-thaw stability and low temperature film formation.

Assembly glue technical parameters

Appearance: milky white liquid
Viscosity: 15000-25000CPS, Brookfield sp.5, 20rpm., 25℃
PH value: 2.5-4
Solid content: 48-51%
Minimum film forming temperature: 5℃

How to use assembly glue

Glue method: machine glue, spatula, brush, rubber roller and other hand glue.
The amount of cloth glue: 120-180 grams / square meter.
Opening time: no more than 8 minutes at 20°C, and the time can be extended by increasing the amount of cloth glue.
Special Note: Do not mix with other glues.

Assembly glue bonding conditions and effects

Wood moisture content: 6-14%
Wood Requirements: Ensure that the processing accuracy of the material and the glued surface are fresh, free of oil and dust.
Bond Strength: Maximum strength is reached 7 days after gluing.
Heat resistance: Has good heat resistance.
Water resistance: has good water resistance.

Assembly glue health and safety

Danger: none
Cleaning method: Maintain good working hygiene. If the glue sticks to the skin, wash it off with water and soap. Used tools can be washed with warm water before the glue dries.

Assembly glue product storage

STORAGE CONDITIONS: Store in airtight original container, protected from high temperature and frost. Unused glue must be sealed to prevent dry skinning and contamination.
Shelf life: 6 months. It is recommended to follow the “first-in-first-use” principle.