How to choose the right edge sealing hot melt adhesive?
1. Pass the bond strength
The stickiness is the biggest mission of hot melt adhesive. Depending on the material, there may be some differences, but the general strength is 60-120 N/18mm.
2, the aesthetic requirements
The edge of the furniture must be beautiful enough. The following details cannot be ignored: the board surface is clean and crisp, and there is no residual glue.
The sealing edge needs to be flat, and the unevenness should not be too obvious.
In the process of edge banding, pay attention to the harmony between the color of the glue line and the board surface and edge banding, and the color is the best.
3. Durability and durability
In addition to aesthetics and good bond strength, it is also necessary to choose durable hot melt adhesive products. It needs to adapt to factors such as cold and heat cycles, high and low temperatures, and humidity changes.
It is recommended to choose good quality hot melt adhesive products. After all, the furniture needs to be used for decades, and the damage will outweigh the gain.
WinLong is a hot melt glue manufacturer, if you would like to learn more, please contact the adhesive experts at internetwoodglue.com. We have served customers in dozens of industries and can meet all your adhesive needs
