Is hot melt glue thin or thick?

Is hot melt glue thin or thick?

After the hot melt adhesive is melted, some are thinner and some are thicker. Which one is better? ——In fact, it depends on the application needs!

Compared with the hot melt adhesive with a low consistency, the hot melt adhesive with high thin consistency will be harder after drying, and the penetration of the material with finer surface fibers is not as good as that of the thinner adhesive, but it does not mean that it cannot penetrate. , Moderate penetration performance improves the adhesive effect, too much penetration and little penetration will not stick well.

In some applications, the glue has penetrated enough to the surface of the material, and the glue and the material are just right. This kind of adhesive effect can still maintain a high level of adhesive effect even if the adhesive layer gradually ages slightly after many years. It can be seen that whether the hot melt adhesive is thick or thin after it is fully melted is closely related to the material to be bonded.

So you say hot melt adhesive is better thin or thick? This is not determined by the hot melt glue itself, but to ask the glue user which one is more suitable. Whether it is hot melt adhesive with high or low consistency, it can exert the same performance in suitable environment.

WinLong is a hot melt adhesive manufacturer, if you would like to learn more, please contact the adhesive experts at internetwoodglue.com. We have served customers in dozens of industries and can meet all your adhesive needs