How to remove and clean hot melt adhesive?
Hot melt adhesive is very common in modern life. It can be used not only in industry and decoration industry, but after hot melt adhesive is used, it is easy to leave some glue, which is difficult to remove. So how to clean hot melt adhesive correctly?
1. How to properly clean up hot melt adhesive in daily life
In daily life, if there is hot melt adhesive on the clothes, it can be cleaned with anhydrous medical alcohol, applied on the hot melt adhesive, and it can be easily removed after it hardens. It can also be cleaned with wind oil, drop some wind oil on the hot melt adhesive, the wind oil will slowly dissolve it, and it will be cleaned up after half an hour. You can also use ice cubes to clean up, apply an ice pack on Hot melt glue, or put it in the refrigerator directly, you can easily pull it off.
2. How to properly clean up hot melt adhesives in the industrial industry
Soak and clean the glue tank of the hot melt adhesive machine with special hot melt adhesive cleaning oil. The specific operation method is: put about 80% of the cleaning oil in the glue tank, set the temperature at about 120 degrees, soak for about an hour, and drain Empty cleaning oil. If the hot melt adhesive in the glue tank is severely carbonized, you can use a cotton cloth wrapped around a wooden stick to scrub the four walls and bottom of the glue tank, and then empty the cleaning oil. Repeat the above process again with clean cleaning oil. (The oil emptied for the second time can be reserved for the next cleaning to reduce waste).
Precautions:
1. In the process of cleaning the hot melt gluer, please wear protective glasses and heat-proof gloves;
2. In order to ensure that the hot melt adhesive has been thoroughly cleaned, it is necessary to carry out multiple cleanings to prevent residues from clogging the nozzle;
3. It is forbidden to mix hot melt adhesives of different brands;
4. During the production process, please close the cover of the glue tank to prevent the sundries or ash layer from falling into;
5. The filter screen is generally not cleaned, and it is mainly replaced to ensure that the pressure of the glue spraying system is stable and smooth.
Winlong is a manufacturer of hot melt adhesives, if you would like to learn more, please contact the adhesive experts at internetwoodglue.com. We have served customers in dozens of industries and can meet all your adhesive needs
